About Bollhoff Rivnuts / Rivstuds Setting Tools
Bollhoff offers a comprehensive range of setting tools for installing Bollhoff Rivnuts & Rivstuds. From simple inexpensive hand operated
tools for use with individual fixtures, to manually loaded one-pull pneumatic tools for medium and large production, to fully automatic
bench mounted auto-fed machines for high volume production, there is a tool for every application.
Type S : Hand Operated Setting Tool
• Manual setting tool
• For use with Bollhoff Rivnuts
• Single-sized riveting tool with threaded drive
• Blind rivet nuts are spun on by hand
• Setting is achieved using a crank and socket
• Application : occasional setting
• Sizes : M5 to M12
• Output : up to 2 pieces per minute
Z 305 : Plier Type Setting Tool
• Manual setting tool
• For use with Bollhoff Rivnuts
• Quick loading and unloading of rivet through a knurled thumb screw
• Setting is done by the lever effect of the pliers
• Practical and quick stroke adjustment
• Application : occasional setting
• Sizes : M3 to M5
• Output : up to 4 pieces per minute
ZH 510 : Lever Type Setting Tool
• Manual setting tool
• For use with Bollhoff Rivnuts & Rivstuds
• Quick installation through threaded mandrel
• Crimping by lever action
• Practical and quick stroke adjustment
• Application : low production volumes
• Sizes : M5 to M10
• Output : up to 5 pieces per minute
E 308 : Rechargeable Setting Tool
• Pneumatic/hydraulic setting tool
• For use with Bollhoff Rivnuts & Rivstuds
• Blind rivet spun on to the mandrel, pneumatic/hydraulic setting, trigger operated spin-off
• Application: high production volumes
• Sizes : M3 to M12
• Output : up to 15 pieces per minute
P 2001
Pneumatic/Hydraulic Setting Tool
• Electric power setting tool
• For use with Bollhoff Rivnuts & Rivstuds
• Constant setting speed
• Switches between setting and spinning automatically
• Tool-less quick-change mandrel system
• Application: medium production volumes
• Sizes : M3 to M10
P 803 Pneumatic/Hydraulic Setting Tool
• Pneumatic/hydraulic setting tool
• For use with Bollhoff Rivnuts & Rivstuds
• Automatic loading by mandrel pressure, automatic spin-off
• Application: high production volumes
• Sizes : M3 to M8
• Output : up to 30 pieces per minute
Bollhoff Rivkle - Blind Rivet Rivnuts / Rivstuds Setting Tools
About Us
